CAM350 Live Product Demonstrations

Below you will find a selection of online module demonstrations designed to give you a better understanding of CAM350's capabilities. Each demo can be either saved to your system to be viewed off-line, or you may choose to watch the demo online.

Please scroll down to see the full selection of live online demos. 

Streams Rule Checking

Streams RC: Learn to automate your process of design analysis with Streams RC.  Run DRC, DFF and Netlist Compare from one Stream. Save off Streams to run against future designs. Customize Streams areas for differing technologies on the same design. Chart the results, for faster verification. Annotate the errors for communication within the design group.

• Streams Rule Checking - 8:47 minutes
• SAVE the executable for later

Load View Edit

• Load View Edit - 2:27 minutes
• SAVE the executable for later

Netlist Compare

Netlist Compare Demonstration to verify that the electrical characteristics of the Gerber layers match the design intent.

• Netlist Compare - 3:30 minutes
• SAVE the executable for later

Crossprobing with Cadence and Mentor

Example with Cadence Allegro - The demo below illustrates crossprobing intelligent data (Allegro) to Gerbers (CAM350). Select a component, pin, or net in the CAD database and zoom to it in the Gerbers.

• Crossprobing with Allegro and CAM350 - 3:42 minutes
• SAVE the executable to view later

Example with Mentor PADS Layout (PowerPCB) - The demo below illustrates crossprobing the results of a DRC back into a CAD database (PowerPCB).

• Crossprobing DRC Error to PowerPCB - 3:42 minutes
• SAVE the executable to view later

DRC and DFF

Design Rule Checking and DFF to verify Gerber layer match design rules plus analysis for design flaws.

• DRC/DFF - 6:00 minutes
• SAVE the executable for later

Fast Array Module

Defines PCB positions on a panel. Quickly array a PCB or group of PCBs on a panel to feed fabrication and assembly processes.

• Fast Array Module - 2:47 minutes
• SAVE the executable for later

Panel Editor

Automates the panelization process. Allows for creation of panel templates, intelligent coupons, pinning holes, fiducials, and title blocks.

• Panel Editor - 6:07 minutes
• SAVE the executable for later

NC Editor

Import, export, and creation NC-mill and drill data.

• NC Editor - 4:45 minutes
• SAVE the executable for later

Reverse Engineering

If you are working with "legacy" data in a Gerber format, DownStream can "Reverse Engineer" it for you. Reverse engineering is the process of starting with Gerber files then adding part and netlist information, to create an intelligent database, which can be brought back to any CAD system.

• Get More Details and View the Demos