Product Videos
All Videos on YouTube
CAM350 Videos Only
BluePrint Videos Only

CAM350XL Technical Video Demonstrations

CAM350XL is an integrated suite of tools that unites all PCB post processing tasks, including: DRC/DFF analysis with Netlist compare, paste and solder mask generation, Gerber file creation, NC drill and mill creation, assembly panel arrays definition, PCB documentation, and ECO automation.  Which is the integration of both CAM350 and BluePrint...

Discover all the demos below for both CAM350 and BluePrint.

BluePrint's Interaction with CAM350 - 4:21 minutes

This video shows how BluePrint PCB and CAM350 can work together to create a release package for the manufacture of a Printed Circuit Board Design. A document set from BluePrint is opened in CAM350 via the link inside BluePrint. The resulting release package is then available in CAM350. The Panelized Gerber's are added to the release package and the database is ready to be sent to the manufacturer.

View Video


CAM350 Basic Mouse Control and GUI - 3:41 minutes

 

Loading Gerber, NC, IPC-d-356 and ODB++ files into CAM350 - 4:17 minutes


This video shows how to load Gerber, NC, IPC-d-356, and ODB++ files into CAM350.

View Video
 

 

Editing Data in CAM350 - 3:44 minutes

This Video show how to do edits such as copy, move, delete in CAM350. It shows how to do multiple selects, so the multiple items can be edited at one time.

View Video
 

 

How to Compare Two Designs in CAM350 - 4:13 minutes


This video shows how to compare two designs using Streams RC in CAM350.

View Video
 

 

Streams Rule Checking in CAM350 - 5:14 minutes


This video shows Stream's RC in CAM350. A design is completely analyzed using a checklist of issues that might prevent successful manufacture of the design.

View Video

 

Netlist Compare in CAM350 and StreamsRC - 2:30 minutes

This video shows how to run a netlist comparison in CAM350 and the Stream's RC checklist.  Gerber and IPC files are loaded, and CAM350 extracts a netlist from the gerber files and comapres to the ipc-d-356 netlist.

View Video
 

 

Design Analysis in CAM350 and Allegro or OrCad PCB Editor - 5:24 minutes

This video shows the interaction of CAM350 and Allegro or Orcad PCB Editor. A design is taken from PCB Editor into CAM350, an Analysis is run, and the results are crossprobed back into PCB Editor.

View Video
 

 

Draw to Flash in CAM350 - 3:34 minutes


This video shows the three options for running draw to flash in CAM350 - interactive, interactive any angle, and automatic.

View Video
 

 

Fast Array Module in CAM350 - 2:24 minutes


In this Video, we create an assembly panel in CAM350 using the Fast Array Module.

View Video
 

 

Creating a Fabrication Panel in CAM350 - 5:34 minutes


In this Video, we create a Fabrication Panel in CAM350. Complete with step and repeat, coupons, and Venting/Thieving patterns.

View Video
 

 

NC Editor in CAM350 - 3:59 minutes


In this Video, We take a look at the NC editor in CAM350 , and how to create an Mill program.

View Video
 

 

Revision Control in BluePrint - 2:56 minutes


This video shows the "sign-off" process in BluePrint PCB. A document set is created and signed off. The document set is reloaded, the revision changed and new data loaded.

View Video
 

 

Creating a Panel (Assembly) Drawing in BluePrint - 7:11 minutes

In this video an assembly drawing is created. The drawing consists of 4 boards arranged with web routes and mill tabs in between them. There are rails on either side of the panel. We also have included a mill tab detail, and a drill chart for the panel drawing.

View Video
 


Creating an Assembly Drawing in BluePrint - 5:09 minutes


This video shows how to create an assembly drawing in BluePrint PCB. Both top and bottom side views of the design, along with Assembly notes and exploded views are shown. We also look at importing DXF data into our Drawing.

View Video
 


Creating an Fabrication Drawing in BluePrint - 4:58 minutes

This video shows how to create a Fabrication drawing in BluePrint PCB. A design is loaded, and the common elements such as layer stack-ups, drill patterns, drill charts and notes are added just by dragging them from the pallet. Dimensions are added, and the word processing capabilities of BluePrint PCB are discussed.

View Video

 

Creating Document Templates in BluePrint - 5:41 minutes

This video shows how to create a Document Template from Scratch in BluePrint PCB. It shows resizing of sheets, borders, and adding title and revision blocks. It discusses Document Variables and how they can be used to automate the filling in of Title and Revision blocks. The video also shows how you can add your company logo to a Title Block.

View Video


Document Creation with BluePrint and Allegro PCB Editor or OrCad PCB Editor - 6:02 minutes


This video shows how to quickly create a document set from Allegro or Orcad PCB Editor. The tool used to create the documents is BluePrint PCB from Downstream Technologies.

View Video
 


Output Options in BluePrint - 5:56 minutes


This video describes four output option in BluePrint PCB. DXF, PDF, Pack and Release, and Publish to the Web.

View Video
 

 

Click to View the All Available Demos (CAM350 and BluePrint) on YouTube

 

You may also contact DownStream directly with any questions: